|
|
|
|
|
The Right Filler Metal for the Braze.
From general-purpose repair work to silver and phos-copper brazing, Arc-Zone has filler metals and fluxes built for different materials, fit-ups, and applications.
SHOP BRAZING
|
|
Build the Right Brazing Setup
Start with the base metals and application, then choose the filler alloy and flux that match the job.
|
|
|
Ready With Flux On The Rod
Flux-Coated Low Fuming Bronze
A versatile oxy-fuel brazing rod for fabrication, repair, and maintenance. The factory-applied flux coating simplifies setup for compatible applications.
✔ AWS A5.8 RBCuZn-C
✔ For steel, cast iron, stainless steel, copper & nickel alloys
✔ Available in 1/16" x 18" and 3/32" x 36"
|
|
|
|
High-Silver Options
SuperFlow Silver Brazing Alloys
Choose between two cadmium-free silver alloys with different melting and flow characteristics for precision brazing work.
✔ SuperFlow 56 CF: 56% silver, BAg-7
✔ SuperFlow 45 CF: 45% silver, BAg-5
✔ Options for copper, brass, steel, bronze & compatible alloys
|
|
|
|
Pick The Silver Content
SuperFlow Phos-Copper Brazing Rods
Three phos-copper alloys give you different flow and fit-up characteristics for copper, brass, and bronze brazing applications.
✔ SuperFlow 0: BCuP-2, 0% silver
✔ SuperFlow 5: BCuP-3, approximately 5% silver
✔ SuperFlow 15: BCuP-5, approximately 15% silver
|
|
|
Complete The Setup
Choose the Right Brazing Flux
SuperFlow White and Black paste fluxes are made for silver and phos-copper brazing alloys. White is the general-purpose option; Black is formulated for higher temperatures and longer brazing cycles.
✔ White Flux: AWS A5.31 FB3-A, general-purpose use
✔ Black Flux: high-temperature / longer-cycle applications
✔ Both offered by Arc-Zone in 1 lb containers
|
|
|
Brazing Quick Tip
Flux Requirements Change With the Base Metal
Phos-copper alloys are self-fluxing on copper, but compatible brass and bronze applications require brazing flux. Always match the alloy, flux, and procedure to the materials being joined.
|
|
|
|
|
|
|
|
