Stocking Stuffer Gift Ideas for Welders
Arc-Zone has some not-so-expensive gifts for welders, some small enough to fit in your favorite welder’s stocking!
ArcTime All Purpose Hybrid Tungsten Electrodes
Our ArcTime Tungsten for TIG welding is one of our best sellers. No matter what kind of material you’re welding, and no matter what kind of machine you’re using, this tungsten is the best.
ArcTime™ brand electrodes are packaged in our exclusive clear plastic tubes with black vinyl removable cap and includes our trademark “wood strip” to minimize moisture contamination and prolong electrode storage life.
Arc-Zone.com’s® High-Quality ArcTime™ brand tungsten electrodes meet or exceed ISO 6848 and AWS A5.12 standards.
MIG Gun holder with accessory plate
Place this MIG torch holder at any point on your welding table–it’s strong and has a magnetic base. It’s fully enclosed base makes clean up of metal fuzz a breeze. And check it out: the handy accessory plate features a slot for MIG Pliers and a nozzle gel canister.
The MIG gun holder may not fit in a stocking, but it sure is a handy tool for a MIG welder!
Half Mask Respirator
The MONSTER(TM) Nozzle
The Monster TIG Nozzle is available for the 17, 18, 26, and CK 3 Series TIG torches, and also available for the 9, 20, and CK 2 Series TIG torches.
The Ground Hog Clamp
Clamps always come in handy, and the Ground Hog Clamp for welding is rated up to 530 AMPS @ 60% duty cycle (with 3/0 cable).
The groove design on the copperhead seals out weld spatter and reduces particle buildup. With the side screw you’ll get a secure cable connection and the body rotates for cable positioning.
TIG Welding Wire container
Each Rod Guard® Canister is certified chloride-free and features a threaded cap with long-lasting neoprene seal to keep electrodes airtight – preventing them from being contaminated with atmospheric moisture.
Stainless Steel Scratch brush
Hand Rest Glide
The Hand Rest glides smoothly on cut-to-length angle iron (not included) allowing you to steady your wrist.
Reduce hand and shoulder stress and fatigue. Safely keep your hand and arm elevated.
The plate also swivels 360° on the base for support in a full arc.
Tungsten Electrode Stickout gauge for TIG Welding
Accurately measure tungsten stick-out in 1/16″ (1.6mm) Increments up to 1″ (25.4mm). Consistently!
The Stickout gauge is made of CNC machined brass with knurled locking sleeve and includes a key ring holder so you’ll always have it with you!
The CK-TG1 TIG Torch Tungsten Stick-Out Gauge measures tungsten stick-out on all industry standard TIG/GTAW/Heliarc torches.
The Gift Card!
And if you really can’t decide, there’s always the Arc-Zone Gift Card!