Welding Tools & Accessories We Can’t Live Without!

In this episode of Arc-Zone’s “The Ultimate Weld Shop”, we feature some of our sweetest tools & accessories laid out on our oh-so versatile BuildPro Table. To view these products, visit Arc-Zone.com

1. VERSATILE MAGNETIC TORCH HOLDER FOR TIG TORCH OR MIG GUN

   TIG Torch Holder: Two slots for extra secure, non-slip storage, and quick slide-out access.
   MIG Gun Holder: Holds gun in perfect position for cleaning the nozzle and cutting back the wire. Includes accessory tray for MIG Pliers and Nozzle Dip.

2. GRINDER REST

   Store your Grinder and all accessories in one convenient and portable rest for easy access. Available as Magnetic Base Model or C-Clamp Base Model.

3. THE GRASSHOPPER CLAMP

   Steady small parts such as bolts, nuts, and thin plates for tack welding at odd angles with full welding clearance. The Spring Clip is used to steady the edge of an angled thin metal plate.

4. INSERTA CLAMP WITH T-HANDLE

   Place Inserta Clamps into the 5/8″ holes on your tabletop for fast and easy clamping. Clamps will automatically lock into the table holes for quick-set hold down clamping.

5. HAND REST GLIDE KIT

   Steady your wrist for ultimate precision and glide to perfection. Kit reduces fatigue, increases Stability and swivels 360°.

6. TABLE MOUNT C-CLAMPS

   Insert the Table Mount C-Clamp into any hole on the tabletop for fast push-down clamping instantly locking into place and ready for use. Mount on the Right Angle Bracket, Riser Block, or Clamping Squares for push-down clamping at an elevated height for taller workpieces.

7. TOP V-PADS FOR UTILITY CLAMPS

   Swiftly attach to the top of Utility Clamps equipped with Standard Pads to enable clamping of tubes and uneven surfaces.

8. DRILL PRESS CLAMP

   Clamps will quickly lock and release making them ideal for repetitive clamping. Secure Drill Press Clamp to any surface up to 1″ thick.

9. CORNER MAGNETS TWIN PACK

   Create 90° corners by holding from the outside, providing you with an unobstructed area for inside tack welds. Use the outer edges of the Corner Magnet for setting up materials at 60°.

10. POWERBASE™ MAGNETIC GROUNDING CLAMP

    Powerful rare earth magnet delivers heavy duty holding power. The copper connector stud allows for better conductivity and the “V” machined surface easily grips round parts.

11. MINI MAGNETIC SQUARE TWIN PACK

    Hold at multiple angles – 30°, 45°, 60°, and 90° – while soldering, brazing and welding
    Compact size makes the Mini Magnets easy to pack into a toolbox for use in the field

12. MIG WELDING PLIERS

    Cut MIG Wire, Remove Contact Tip and Clean Nozzle Spatter. If you are MIG welding you need these pliers.

13. TUNGSTEN STICK-OUT GAUGE FOR TIG WELDING

    Consistent Welds = Consistent Stick-Out – No more eyeballing, replicate your optimal setup by measuring your tungsten electrode stick-out. Constructed of CNC Machined Brass with Knurled Locking Sleeve and has incremental 1/16″ markings all the way up to one inch.

14. SHIELD GAS FLOW TESTER FOR TIG, MIG, & PLASMA

    Accurately measures shield gas flow rates at the torch and takes the guesswork out of optimizing your welds. Pays off with reduced weld variations and lower gas usage.

15. ROD GUARD

    Provide optimal storage and inventory control for all your filler metals. These rugged containers are constructed of high-impact polyethylene, certified chloride-free, and neoprene seal to keep electrodes airtight preventing contamination from atmospheric moisture.